Impeller is very important part in blasting wheel of shot blasting machine.
In the early operation of impeller all regular check, as long as there is an opportunity, must check whether the impeller crack, wear, dust and other defects.Whenever possible, must make the impeller maintained in a clean condition, and regularly use wire brush to brush off the top of the dirt and rust peel, because with the running time is lengthened, the dust since it is not possible to uniformly attached on the impeller, and impeller balance and cause damage caused, rotor vibration.Impeller as long as repairs were carried out, to its with respect to need to make dynamic balance.If the conditions, can use the portable dynamic balance instrument in field balancing.The actuator balance before, must check all the locking bolt is tightened.Because the impeller has been in the state of unbalanced running for a long time, these bolts may have loosed.
没有评论:
发表评论