Dough Kneader

Dough Kneader

1. The HW series dough kneaders are the main equipments for food processing, they can mix water and flour evenly to make dough. (You can also add some other additives such as edible oil, sugar etc.) You can save labors and increase the work efficiency in aid of this kneader.

2. The HW series dough kneaders have the characters of high applicability, compact structure, good seal, homogeneous mixing, and little noise, less consumption, less manpower, stable running, easy operation, and high efficiency.

3. These kneaders are widely used in all kinds of catering units such as guesthouses, hotels, food processing plants etc.

GJS130 Chili Slivers shredder

GJS130 Chili Slivers shredder

1. The GJS130 chili slivers shredder is a new type of vegetable shredder designed by our factory. It is ideal chili processing equipment for chili processing factory, restaurant, mess hall and individual processing units. 

2. Its close structure can seclude the dust of air, which is hygeian and safe. The magnetic device can separate the ferrous material from the raw material so that the lifetime of blades can be extended.

CP 150 /300 Filling making machine

CP 150 /300 Filling making machine

The machine can process various vegetables (carrot, potato, tomato, celery, olive, bamboo shoot etc) to be chopped filling quickly and easily, and chopped filling can act as dumpling filling or vegetable feeds.

Feature

1. It adopts the principle of relative motion which can make vegetables and the cutters moving relatively, in this way, the materials are cut into stuffing.

2. This machine has the characters of Sharp curvilinear blades, compact design, easy to maintain and clean.

3. Driven by turbine device, low noise and long lifetime.

sandblasting is a wonderfully popular technique

In decorating glass, sandblasting is a wonderfully popular technique, with few substitutes. While hand-etching is possible, it is incredibly time consuming and expensive, and laser-etching has a range of flaws which make it a questionable choice. There are two main ways in which sandblasting is used to decorate glass: etching and carving.

In glass etching, abrasive is blasted at the glass lightly to turn the glass semi-opaque. This 'whiting' or 'snowing' of the glass can be used to great effect to produce words or images. By adjusting the speed of the sandblasting and the angle from which the abrasive is being launched, differing shades can be created, allowing for some true works of art. Glass is carved by steadily sandblasting the surface through a stencil which protects the areas you don't want to be carved out. Sandblasting as a technique for carving can be very nuanced, with differing depths and angles of cuts creating an array of lighting effects that may be quite beautiful.

The cost of sandblasting equipment depends greatly on the scope of the projects intended. A small home glass carving setup can be acquired relatively inexpensively, while a system with a cabinet capable of handling larger pieces of glass and more nuanced sandblasting can cost significantly more. A professional-level artistic sandblasting setup will likely be quite expensive. Industry-level sandblasting equipment also varies in cost, again depending on the scale and scope of the projects to be completed.

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

Students' Overall Quality Competition in 2012

 Students' Overall Quality Competition in 2012, 

Shandong Province machinery and automated post a sub-venue final Shandong Kaitai Group kicked off the 28th. Match the scene from the top ten players to enter this post in the final two players selected to enter the contest finals. It is reported that all the other four positions of the points of the contest arena finals will be carried out one after another in the near future, the top two players of each position will participate in the finals in October unified rivalry contest winners million careers funds.    

Some contests finals the workplace face-to-face mode, employing enterprises and contestants to face interaction. Game scene Kaitai Group, win shares, Shandong Airport employing enterprises scene of the jury, contestants scoring appraisal, and direct intention to conduct on-site for interested players employ signing. The players can also be based on their career plans and expectations unselected enterprise. In addition, competition has also increased Expert Reviews link, invited senior media and professional managers employing units and players ideas, both to increase the whole race Aspect, letting participants in the event to be raised from different levels.    

According to another report, the overall quality of the 2012 college students contest is divided into registration, qualifying, semi-finals and finals of some contests, the finals, employment recommended six stages qualifying Provincial Personnel Center majors evaluation software, the use of "people machine dialogue "form of testing, help students comprehensive understanding of their own system. Contest since its launch in June, a major social concern, the finals will be the end of October, the Organizing Committee will continue to be for all players and participate in that people post match personnel recommended follow-up work.

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

YTD Series Disinfection Tableware Cabinet Features

YTD Series Disinfection Tableware Cabinet Features

1.disinfection tableware cabinet
2.stainless steel machine
3.best quality
4.It is suitable for star hotel,luxrious restaurant

Features:
1.Body is made of good quality stainless steel and table is natual marble,which is luxurious 
and durable.

2.With high-performance ozone sterilization technology, there is no dead angle for sterilization , 
so it is energy saving and environmental protection.

3.In the use of thermostatic temperature drying technology, ultra-high temperature protection device.

YTD Series Disinfection Tableware Cabinet application

YTD Series Disinfection Tableware Cabinet application

Range of application:

It is suitable for star hotel, luxrious restaurant,KTV ,domestic kitchen or other catering units..

Technical Parameter:

Model	YTD-328A-1	YTD-338A-1	YTD-368A-1
Cubage(L)	250	250	350
Rated Power(W)	600	600	600
Rated voltage(V)	220	220	220
Rated Frequency(Hz)	50	50	50
Disinfection Temperature(°C)	<70	<70	<70
Ozone Concentration(mg/m3)	≥10	≥10	≥10
Rated Weight(kg/layer)	15	15	15
Structure	Two-door three layer	Two-door three layer	Two-door three layer
Dimension(mm)	780*470*1075	780*470*1075	1180*470*1075
Packing Size(mm)	870*560*1150	870*560*1150	1260*560*1150
Volume(m3)	0.56	0.56	0.81

high-temperature disinfection tableware cabinet

high-temperature disinfection tableware cabinet

Specifications

1. cleaning ark
2.clean and sterilize different kinds of tableware
3. sterilization with high efficiency
4.with high effic

Features:

1. Both inside and outside of the cabinet are made of high quality stainless steel which make the products more durable, clean and efficient.

2. This series machine use foam technology so that it has the character of good insulation properties, short heating time and long heat preservation time

3. Adopting high-temperature sterilization and far infrared heating technology,sterlization is thorough.

4. More convenient operation through independent control of each chamber.

5. Special over-temperature protection, temperature control for cabinet and multiple protection devices to assure the safety use.

6. Adapted to the temperature above 150 °C tableware, tea sets, such as metal, glass,ceramics and

Range of application:

It is suitable for star hotel, luxrious restaurant,KTV ,domestic kitchen or other catering units..

Brief Introduction about Shot blasting procedure

Shot blasting procedure uses precisely the same strategy as sandblasting machines other than that shot pellets are utilized instead of sand. Shot blasting machine also yields distinct outcomes to sandblasting; shot pellets are heavier and more substantial, yielding a far increased kinetic power so effective it deforms the surface area it impacts against. Shot blasting approach is essentially used intended for hardening surfaces in lots of industrial segments these kinds of as plane, ship and car (wherever any type of steel sheets are used).

Shot blasting method can be used to harden the surface area against versus physical stress at the same time as to sleek out any irregularities. On account of the nature of shot blasting press, a sand blasting machine cannot be used for this process (its areas are created regarding very good press, such as sandblasting sand), a specifically developed shot blasting device is used by the shot blasting method. Shot and sand blasting machine are very similar in function and style, however.


Shot blast machine are greatly used in any industry that uses metallolurgy: car, ship, plane, arms, equipment and many others. Shot blasting procedure is essiential to production method involving steel sheets and structures

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

Warmly congratulate on biomass power plant CDM project Register in the United Nations

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73


On September 12, 2012,Our Kaitai biomass power plant CDM project Register in the United Nations , the annual quantity of 106000 tons, the effective period is July 24, 2012 to July 23, 2019, a total of 7 years.

2009-2011 annual national anti-corrosion industry outstanding enterprise leader

Shandong kaitai Graoup WangRuiGuo general manager by the Chinese industrial anticorrosion association were evaluated: "2009-2011 annual national anti-corrosion industry outstanding enterprise leader"Our company mainly produce shot blasting machine,metal abrasive steel shot,Wear spare parts,blower fan machine.

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

2009-2011 annual national anti-corrosion industry 20 strong enterprise

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73


Recently, Shandong kaitai shot blasting machine
company award "2009-2011 annual national anti-corrosion industry 20 strong enterprise"

2009-2011 annual national anti-corrosion industry construction operation enterprise top 20

Recently, Shandong kaitai shot blasting machine company award"2009-2011 annual national anti-corrosion industry construction operation enterprise top 20",

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

Australian customers to our Company acceptance equipment

On September 18th, 2012, Australia customers to our company acceptance QH69 shot blasting machine.Then, visit our exhibition hall with our international trade department manager and ministers.Our company was export to Australia a Q69 blast cleaning line in 2008.

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

Shandong Kai Tai Group organization personnel to visit Binzhou Bohai piston limited company

More than 30 people of our shandong kaitai shot blasting machine company in the Wu Chengmin of vise general manager, under the leadership of Yin Jianguo visited Binzhou Bohai piston limited company on September 14th, Bohai Pistons president Lin Fenghua and other leaders met with my company visit, then in Bohai piston leaders visited the Bohai pistons of production and processing workshop, laboratory, such as warehouses, the end of the tour later, in the Bohai pistons conference room to watch the Bohai pistons trailer and had have an informal discussion.This visit, we harvest, not only broaden our vision, so that we feel the Bohai pistons in the visual management, plant management and other aspects of the advantages, for the future of our company in the improvement of reference, but also to strengthen the enterprises' direct communication.

http://www.kai-tai.com.cn/newscenter/shownews.asp?id=563

http://www.kaitaimachinery.com/

http://gracekaitai.blogspot.com/

https://twitter.com/gracekaitai

http://gracekaitai.blog.com/wp-admin/edit.php

http://www.facebook.com/grace.bian.73

leafy vegetable cutter Feature

1.multifunction vegetable cutter
2.different cutting shapes
3.adjustable thickness and length

leafy vegetable cutter Introduction
1.The CHD-63 vegetable cutter is suitable for segmenting the stem,leaf vegetables.
2.It can cut the hard vegetables into slices and slivers efficiently.
3. Matching to the request of kitchen, restaurant,school, hotel, and other vegetable process ing factory.

leafy vegetable cutter Feature
1.The finished slices is smooth and even without damaging the fiber of the vegetable
2.The vegetable cutter is useful, energy saving, high production efficiency, easy to maintain and clean and low malfunction rate.

 leafy vegetable cutter Parameters
Model: CHD63
Output:630 kg/h
Weight:125kg
Power:0.75kw
Voltage:220V/380V

Feature for CHD100 Vegetable&Fruit Dicer Machine

Feature for CHD100 Vegetable&Fruit Dicer Machine

1. The machine can make the vegetables into regular shapes for one time with smooth sections by compound cutters

2. Latest design , easy to operate, energy saving, beautiful apperance, meeting the hygeian standard

3. Slice size : 3. 4. 5. 6. 9. 8. 10. 12. 15. 16.20 mm ,if for other size we can made to order

Parameter for CHD100 Vegetable&Fruit Dicer Machine




Model

output

dimension

Weight

Power

Voltage

Motor




CHD100

1000kg/h(max)

710*660*1085mm

100kg

0.75kw

220/380V

Y802-4

Descriptions for CHD100 Vegetable&Fruit Dicer Machine

Descriptions for CHD100 Vegetable&Fruit Dicer Machine

1. The CHD-100 series vegetable dicer vegetable cuber is mainly used for cutting various root vegetables into cubes, the machine can also cut the vegetables into slices, threads with different knife combination.

2. It is suitable for the kitchen, restaurant, messhall, hotel and other vegetable processing plants.
Shandong Bailitong Trade Co,.Ltd mainly export cooking machine.

JGL120 Dumpling Making Machine

dumpling making machine
1 ISO9001 certificate
2 competitive price
3 OEM service
4 long life time

JGL120 Dumpling Making Machine

1. JGL120 dumpling machine is designed and inspected strictly as per the standard of commercial ministry of China. (SB/T10129-92)

2. This Machine is applicable to make dumplings, samosa, spring rolls and wontons by changing the forming mould. The stuffing of these finished products can be all kinds of 100% meats, all kinds of 100% vegetables and mixture of meat and vegetable, and these finished products can be boiled, steamed, fried and freezed. The thickness of dough crust and the quantity of filling can be adjusted as well.

3. This machine is widely used for quick-freeze food processing factories, hotels, restaurants, dining halls, canteens and other catering units.